Cesco Ready Gloss Mixed Glazes 1 Litre Tan 1080-1220

This is a tan glaze is fired at an earthenware temperature in an electric kiln. The fired colour is tan brown.

The glaze is applied by brushing two even coats. The glaze does not contain lead and is safe to use both in its application and after firing.  

Directions for use:

Stir well. Apply with as large a brush as possible and flow on three even coats to a thickness of approximately 1mm. Allow each coat to dry for about one minute before applying the next coat. Insufficient thickness will result in poor colour development.

Thin fresh glazes only with water if required for dipping or spraying. Care should be taken if reconstituting glazes that have dried out as glaze faults can develop in firing.

Replace lid after use ensuring rim and lid are clean so a good seal is achieved. Store in a cool dry place away from sunlight.

Link Cesco Colour Chart